Custom 3D models
Designed from your sketch, photo or measurements, and ready to print.
3D Printing & Modeling
Custom parts, designed and printed to fit. Tell me what you need and I'll model it in 3D and print it on my Bambu Lab X1 Carbon. If you have your own printer, you can get the print-ready files instead.
- Bambu Lab X1 Carbon
- PLA & PETG
- STL & 3MF files
What I can make for you
If you can describe it, I can model it
Electronics cases
Cases for Raspberry Pi, Arduino and custom boards, with a cut-out for every port.
Replacement parts
A broken clip, knob, bracket or cover? I can model and print a new one.
Prototypes
Try out an idea in plastic before you make it for real, and change it quickly.
Gifts and custom items
Name tags, keychains, stands and holders, made just for you or someone else.
Print-ready files
STL or 3MF files set up for your printer, if you'd rather print it yourself.
My workshop
The printer and materials
- Printer
- Bambu Lab X1 Carbon
- Biggest print
- About 25 × 25 × 25 cm in one piece
- Materials
- PLA and PETG, others on request
- Files
- STL, 3MF and OpenSCAD
Examples
Designs I've made
Click the small pictures to see each design from other angles. These are 3D renders of the designs.
Electronics case
Raspberry Pi 4 + 4G Case
A two-part case for a Raspberry Pi 4 with a 4G board stacked on top. Every port has its own opening, the lid and base have vents, and three holes let the antenna cables out. A fit check on the computer makes sure the case doesn't touch the boards anywhere.
- Snap-together base and lid
- Openings for every port and antenna
- Fit checked on the computer before printing
Product designElectronics
Drink Capsule
A battery-powered drink holder that keeps a can hot or cold. I designed the body, the lid, the battery tower and all the small parts to fit around the electronics, then put every part on one print plate. It comes with a product-style instruction manual.
- Every part designed to fit around the electronics
- All the parts print together on one plate
- A product-style PDF manual
Questions
Good to know
What do you need from me?
A sketch, a photo or a few measurements is plenty to start. For a replacement part, clear photos of the broken piece next to a ruler help a lot.
How big can you print?
Up to about 25 × 25 × 25 cm in one piece. Bigger things can be split into parts that fit together.
Which material should I pick?
PLA is great for most things that stay indoors. PETG is tougher and handles heat and sunlight better, so it's good for outdoor and car parts. Not sure? I'll recommend one.
Can I just get the 3D file?
Yes. I can send STL or 3MF files that are ready for your own printer.
How do I get my print?
We'll sort out pickup or shipping when I send your quote.
Need a part made?
Send a sketch, a photo or a few measurements and I'll send you a free quote.